U-Bolts


Collared U-Bolts

In 316 stainless steel with stainless steel nuts under nylon collars. All U-Bolts supplied with 1 plate, 2 nuts and 2 washers in 316 stainless.
*Part No. 0223 has Nyloc nuts and Part No. 0224 has spring washers.
 
The advantage of the Baseline design for U-Bolts is that they are adjustable from above the deck where there is easy accessibility. The nuts can be run up by hand on the underside of the deck, where confined space often makes it difficult to use a spanner, and then can be tightened from above the deck. If necessary the nuts can be adjusted by up to 3mm, to compensate for any uneveness in the deck. After they are tightened the attractive nylon collars snap over them.
 

U-Bolts Without Collars

Made from 316 stainless steel, supplied with 1 plate, nuts and washers.

Sealed U-Bolts

Made from 316 stainless steel. Supplied with 1 plate, nuts and washers. This new design has a red thermoflex seal under the plate preventing the need for sealant.

Backing Plate For Sealed U-Bolts

Made from 316 stainless steel.

Wichard Sealed U-Bolts

Made from 316 stainless steel, with a UV resistant rubber collar to prevent the need for sealant.

U-Bolts

Made from 316 stainless steel. Supplied with 1 plate, nuts and washers.

Pipe Clamps

Made from 316 stainless steel. Supplied with nuts and washers.

Large Collared U-Bolts

Large M16 collared U-Bolt in 316 stainless steel, supplied with 2 plates and all stainless steel collars.
 
The advantage of the Baseline design for U-Bolts is that they are adjustable from above the deck where there is easy accessibility. The nuts can be run up by hand on the underside of the deck, where confined space often makes it difficult to use a spanner, and then can be tightened from above the deck. If necessary the nuts can be adjusted by up to 3mm, to compensate for any uneveness in the deck.

Uncollared U-Bolts

Made from 316 stainless steel.

U-Bolts

Made from A2 stainless steel. Supplied with 1 plate, nuts and washers.

Collared U-Bolts

In 316 stainless steel with stainless steel nuts under nylon collars. All U-Bolts supplied with 1 plate, 2 nuts and 2 washers in 316 stainless.
*Part No. 0223 has Nyloc nuts and Part No. 0224 has spring washers.
 
The advantage of the Baseline design for U-Bolts is that they are adjustable from above the deck where there is easy accessibility. The nuts can be run up by hand on the underside of the deck, where confined space often makes it difficult to use a spanner, and then can be tightened from above the deck. If necessary the nuts can be adjusted by up to 3mm, to compensate for any uneveness in the deck. After they are tightened the attractive nylon collars snap over them.
 

0 Item(s)
£0.00