Products


Halyard Cleats

Made from forged 316 stainless steel.

Hollow Based Cleats

Made from 316 stainless steel.

Handled Aluminium Fairleads

Made from aluminium. Sold only in pairs.

Hand and Grab Rails - Stud Fixing

Stainless steel handrails are strong and have outstanding corrosion resistance. So if you need to fit out or replace your rails, then these are quality made from top grade 316 marine grade polished stainless steel. Also used as steps.
M8 stud fixing, comes supplied with nut and penny washer at each end. Height 47mm. 36in rails have 1 centre support. 48 rails have 2 centre supports. Made from 316 polished 3/4" (19mm) stainless steel tube.

Hand and Grab Rails

Stainless steel handrails are strong and have outstanding corrosion resistance. So if you need to fit out or replace your rails, then these are quality made from top grade 316 marine grade polished stainless steel. Also used as steps.
1.75in diameter disc fixing with two fixing holes at each end. Height 47mm. To suit 5mm bolts or No 10 self tapping screws. 36in rails have 1 centre support. 48in rails have 2 centre supports. Made from 316 polished 3/4" (19mm) stainless steel tube.

Hasp And Staple

Made from 316 stainless steel. Robust and popular hasp and staple.

Hatch Fastener

Popular hatch fastener with lever locking action. Made from chrome plated brass.

Halyard Shackle

Made in 316 stainless steel with a captive pin.

Hand Crimping Tools

Designed as a simple economical and portable method for splicing small wire ropes. Jaws are marked to denote:'A Type B.S. Ferrules','D Type Din 3093 (intal) Ferrule'.

Heat Shrink Tubing

To cover rope and wire spliced ends. Tough, flexible, flame retardant Ployolefin tubing, shrink ratio 3:1. Sold in 1metre lengths of black.


Made from forged 316 stainless steel.

0 Item(s)
£0.00