Victory Rigging Accessories


Splice Kit

Plastic splice kit for braided rope 4 sizes of needle. Supplied with instructions.

Splice Kit Stainless Steel Fids

Splice Kit Stainless Steel Fids - innovative splicing tool for splicing braid on braid and other ropes. Quality engineering and all the spikes fit inside one another.

Hasselfors Stainless Toggles

Hasslefors rigging toggles are made from high-grade, marine stainless steel - SS2343 (AISI 316L. Carbon content max 0.03% molybdenum content 2.5-3.0%) and are polished for higher corrosion resistance.

Hasselfors Split Pins

Hasslefors Split Pins made from stainless steel 

Hasselfors Split Rings

Hasslefors Split Rings made from stainless steel 

Hasselfors Clevis Pins

Clevis Pins Made from stainless steel

Threaded T Terminal

Threaded T Terminals Made from stainless steel

Stud Terminals

Stud Terminals made from 316 stainless steel

Eye Terminals

Eye Terminals Made from stainless steel

T Terminals

Hasselfors T Terminals, made from 316 stainless steel

Lifeline Terminals (Swivel End)

Hasselfors Lifeline Terminals, made from stainless steel

Fork Terminals (Roll Swage Forks)

Hasselfors Fork Terminals, made from stainless steel

Backing Plates (for T Terminals)

Hasselfors Backing Plates, made from stainless steel

Threaded Eye (all left handed)

Hasselfors Threaded Eye made from stainless steel.

SureCheck Rig Tension Meters

An economical alternative to the well known Professional Loos Gauge. Surecheck offers a quality product for tensioning wire from 2.5mm - 10mm Diameters. Please note these are not suitable for rod rigging.

SureClip for Rigging screws

A design which replaces the traditional split pins on stainless steel rigging screws.  

Rigging Screw Oil

All rigging screws (bronze or stainless steel) should be lubricated every year using Hasselfors special formular high-viscosity oil.

Rigging Screw Covers in Aluminimum

Designed for the serious off-shore sailor, this aluminium rigging screw cover is smoothly rounded and kind to sails, sheets and clothes. Chafe is reduced to a minimum and rigging screws can be kept well-lubricated without fear of staining sails or sheets.

Backstay Tensioners

Hasselfors  backstay tensioners have smooth, clean surfaces. Even the fork terminal is fully covered. These low-weight backstay tensioners are simple to use. Insert  a standard winch and handle and turn. The tensioner has a maximum working load of 30kn. The stroke is 250 or 400mm, depending on model chosen.

Bannister Rope Fittings

Polished solid brass for 36mm rope. Ideal for in door use.

Splice Kit

Plastic splice kit for braided rope 4 sizes of needle. Supplied with instructions.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 Item(s)
£0.00