Forestay Levers, Adjusters and Furlers

Page 1 of 1   [1]

Ratchet Backstay Adjuster

Ratchet Backstay Adjuster

Backstay adjusters enable you to get the best performance from your rig, by inducing top mast bend and reducing forestay sag. This well-tried and tested range of high quality backstay adjusters are engineered from the finest materials available. The design has a long history of providing trouble free service.

The non-hydraulic ratchet action eliminates the risk of messy oil leaks and should any accidental damage occur a competent technician anywhere in the world could repair it.

There are 4 sizes in the range, for 7mm-12mm wire size. Manufactured in the UK by Seaure.

Part No. Product Description Wire Dia/mm Length Extended/mm Length Retracted/mm Pin Dia/mm Min Breaking Load/Kg Our Price More Details
SS-21-56 Ratchet Backstay Adjuster for 7mm Wire 7 492 356 11.1 3200 £748.60 Each View more details
SS-21-58 Ratchet Backstay Adjuster for 8mm Wire 8 546 381 12.7 4100 £935.65 Each View more details
SS-21-60 Ratchet Backstay Adjuster for 10mm Wire 10 720 475 16.9 7800 £1,931.10 Each View more details
SS-21-62 Ratchet Backstay Adjuster for 12mm Wire 12 775 500 19 11000 £2,715.45 Each View more details

Forestay Lever

Forestay Lever

Fabricated from 316 stainless steel this well tested and reliable design is tough and strong. As well as being used for inner forestays they can also used as a safety device on boats fitted with furling headsails allowing a strom jib to be flown in an emergency. Essentual for fast assembly of inner forestays in bad weather conditions.

There are 2 sizes in the range, for 6mm-8mm wire size. Manufactured in the UK by Seaure.

Part No. Product Description Wire Dia/mm Length Open/mm Length Closed/mm Pin Size/mm Min Breaking Load/Kg Our Price More Details
SS-21-40 Inner Forestay Lever for 6mm Wire 6 380 260 10 2100 £281.40 Each View more details
SS-21-42 Inner Forestay Lever for 8mm Wire 8 514 375 12 4100 £447.42 Each View more details

Stay Adjusters

Stay Adjusters

Used on dinghies instead of a rigging screw for easy, pin-release adjustment. Made from Stainless Steel, supplied with clevis pins.

Part No. Product Description Length/mm Pin Size/mm Our Price More Details
SSSA100 5mm x 100mm Stainless Steel Stay Adjuster 100 5 £4.74 Each View more details
SSSA200 5mm x 200mm Stainless Steel Stay Adjuster 200 6 £8.04 Each View more details

Shroud Adjusters

Shroud Adjusters

Made from Stainless Steel, supplied with clevis pins.

Part No. Product Description Length/mm Pin Size/mm Our Price More Details
SS-25-41 Shroud Adjuster 96mm 96 4 £12.36 Each View more details
SS-27-25 Shroud Adjuster 68mm 68 43 £10.02 Each View more details

Dingy Furlers

Dingy Furlers

The Sea Sure jib furler is designed for complete reliability. The
drum is completely enclosed to prevent rope from coming off and
jamming during operation. It also features an all stainless steel
thrust bearing so that it still operates easily when the forestay is
fully tensioned. Being less than 50mm between centres allows the
jib to be set very low to the deck for maximum sail efficiency. It can
also be mounted below the deck using an additional stainless steel
extension tube. The furler will take up to 3.5m of 3mm line allowing
it to be used on sails with a foot length of approximately 3m (this is
reduced if larger diameter line is used). Drum Diameter: 69mm
Weight: 116g (25-54).

Part No. Product Description Our Price More Details
SS-25-54 Dinghy Jib Furler £69.24 Each View more details
SS-25-57 Head Swivel with 4mm Top Slot £49.02 Each View more details
SS-25-57A Head Swivel with 6.5mm Top Slot £49.02 Each View more details
SS-25-58 Spare Casing for SS-25-54 £22.56 Each View more details

Highfield Lever

Highfield Lever

A robust lever made from 316 stainless steel with a 5 position adjuster. The long handle allows easy adjustment  even under considerable loads.

Part No. Product Description Our Price More Details
SS-25-40 Highfield Lever £45.00 Each View more details

Page 1 of 1   [1]