The Sea Sure jib furler is designed for complete reliability. The
drum is completely enclosed to prevent rope from coming off and
jamming during operation. It also features an all stainless steel
thrust bearing so that it still operates easily when the forestay is
fully tensioned. Being less than 50mm between centres allows the
jib to be set very low to the deck for maximum sail efficiency. It can
also be mounted below the deck using an additional stainless steel
extension tube. The furler will take up to 3.5m of 3mm line allowing
it to be used on sails with a foot length of approximately 3m (this is
reduced if larger diameter line is used). Drum Diameter: 69mm
Weight: 116g (25-54).
