Stainless Steel Tube ?id=162, Stainless Steel Tube

Made from polished 316 stainless steel. Ideal for forming canopies and sprayhoods, compatible with our Canopy Fittings and Handrail ranges.

Sold by the metre, the maximum length is 6 metres if collected or 2 metres when sent by a carrier - 2 metre lengths incur an extra shipping charge. The Maximum length for post is 60cm. Long lengths of tube are sent at your own risk. Please detail your cutting requirements when you order.

Note: Tube is cut by hand with a hacksaw and may not be precise in it's length and may show slight marks from the vice. We can cut your tube in half for ease of shipping, if more than 1 cut per metre is required an extra charge may be applied. 

Fast and easy to square off tube ends for use with internal end plugs. Must only be used with cordless drills on slow setting.

A ridged component used to join two tubes of the same size, one half is riveted to the tube and the other is fixed using a tube spring (drill jig available). Ideal if the frame is large and needs transporting, can use two shorter lengths of tube and also can be stored on board more easily if required. Made from 316 stainless steel.

Simply pop rivet or screw (M5) both halves of the tube hinge to the tube to create a neat hinge in a length of tube. Ideal for gangways on guard rails or for canopy frames to be folded for easy stowage. Made from 316 stainless steel.

Ideal for blanking off our range of stainless steel tubing. Creates a neat, safe end to cut tube, push fit. Moulded in black plastic.

Ideal for blanking off our range of stainless steel tubing. Creates a neat, safe end to cut tube, push fit. Moulded in black plastic.

Ideal for fixing items to tube, moulded in black plastic.